Ok

En poursuivant votre navigation sur ce site, vous acceptez l'utilisation de cookies. Ces derniers assurent le bon fonctionnement de nos services. En savoir plus.

28/06/2009

Obsessed with Chains

DIY Project = The Chain Bracelet

So i made these medieval “wrapped yarn” bracelets, after being inspired by yarborough jewelry’s collection, as profiled below!

start with:

(x3) bracelets of your choice…i recommend different sizes.

(x1) skein of lion brand yarn

(x10) (3/8″) pyramid suds

(x10) “O” rings

(x1) 45″ of chain (or less)

Chain bracelet: wrap the yarn tightly around the bracelet- secure with tight knots, at interior.  Place the “O” rings on your bracelet, about 1″ and 1.5″ apart- drape the chain between- secure and close thru “O” rings.

Stud bracelet: place the studs randomly, along the bracelet.  Tuck prongs into yarn- press to secure w/ thumbs, and prongs will close on impact pressure.

Good luck !

xox valerie (Bleach Black)

DIY Project = The Body Chain

chainmail1

So i finally finished my diy body chain…inspired by both “bliss lau” and “erin wasson’s low-luv” respective collections, i set out to make my own…the result reads “part-time knight at medieval times, goes to the renaissance faire”…(i’m kinda’ feeling it!? )

I made this project a lot harder than it needed to be, as i wove “mini chain” thru the “medium chain”, as i wanted a traditional medieval chainmail effect.  You could skip that step, and save yourself about 4 hours.  total project was about 5 hours, but could be as little as 1 hour, should you skip the weaving…

Start with:

  • medium chain (x2) lengths of 42″ chain (84″ total)
  • (optional) mini chain (x2) lengths of 52″ chain (104″ total)
  • large chain (4″) for front horizontal drop
  • large chain (6″) for front vertical back connecting chain
  • (x1) package of “O” rings- use for connecting chain
  • small pliers
  • sharp scissors or cable cutting pliers (lineman’s pliers)

Weave mini chain thru medium chain (optional), cut lengths as advised above.  use “O” rings to secure mini chain, within medium chain.  Trim excess mini chain, after secured with “O” rings.  drape the chain on yourself in a mirror, and play with the placement.  Secure chain w/ “O” rings.  You can also open he chain, and close with pliers, for a more “finished/ professional” effect, if you have the right tools.

Good luck !

valerie x bleachblack.com